What if the Body camera keeps malfunctioning? Don't panic, first look at these ways to avoid mistakes

Now all kinds of law enforcement work has entered a state of overload. At this time, law enforcement officers or the good partner of high-load operation personnel - Body worn camera, also should open the high-speed operation mode.

The machine will also go wrong under high load. As a result, the Body camera always breaks at the critical moment, also became the norm.

Fault 1: burning machine

Specific performance: unable to boot

Cause: Charging overload causes the chip or motherboard to be burned out

How to avoid: In order to avoid this situation, you have to choose a special charger, the best in the voltage stable power supply charging; If you must use car charging, also must choose the right current intensity.

Fault 2: Formatting error

Specific performance: do not start/do not save/black screen/crash

Cause: The formatting operation is improperly selected

How to avoid: Power on the device when it needs to be formatted. Look at the motherboard model in the upper left corner of the screen and select the formatted system and distribution unit based on the model and memory.

Fault 3: The USB port is damaged

Specific performance: Can not connect to the computer/do not charge

Cause: Damage caused by reverse insertion or excessive force

How to avoid: Look at the direction when connecting, and insert the data line vertically, and try to avoid bending when connecting.

Fault 4: The battery port is damaged

Specific performance: no boot/no charge

Cause: The battery port is incorrectly connected

How to avoid: When connecting the battery, check the direction of the battery port.

Fault 5: Battery bulge and additional damage

Specific performance: the power is not durable, or can not be turned on

Cause: Low temperature state, direct charging

How to avoid it: This is especially common in the north because of the large temperature difference outside. If the battery is charged immediately after returning to the room, the capacitive activity will decrease, and even electrolyte crystallization will cause the bulge of the battery shell, which will seriously affect the battery life and power level. Even after expansion, it will press the motherboard and cause other hardware damage, increasing maintenance costs. To avoid this fault, leave it in the room for half an hour before charging.